In stock · ships in 2 weeks
Slurry tank 350 L — ready to ship
Factory-new 316L slurry and media preparation vessel, built and tested in Cernobbio (Italy). Gravimetric control on four load cells, seal-less magnetic agitation, integrated peristaltic transfer and a hygienic CIP/SIP design. Available now, without the build-to-order lead time.
The unit, part by part
Every figure below is a confirmed value for this unit. Anything not yet confirmed is not printed.
- 5 L powder hopperTop-mounted stainless steel hopper with its own clamp valve, for controlled addition of powders and additives.
- Torispherical top headTri-Clamp sanitary ports, with no dead legs at the connections.
- 350 L vessel in AISI 316LRa ≤ 0.4 µm inside, satin outside, H/D ratio 1.5:1.
- Sight glass on the shellLevel and agitation can be checked from outside, without opening the vessel.
- Bottom-mounted magnetic mixerSeal-less magnetic drive: nothing passes through the vessel wall, so there is no dynamic seal to leak or to clean apart.
- Four load cells250 kg each, 1,000 kg total nominal capacity. OIML R60 C3, IP67.
- DN25 bottom outletZero dead leg, on a fully drainable torispherical bottom.
Also on board
- CIP/SIP hygienic design
- CIP spray ball
- Pt100 temperature probe
- One spare port for an additional sensor
- Peristaltic transfer pump, tubing #88 / #92
Components and why they matter
Gravimetric control: four load cells
Weight is the most direct measure of what enters and leaves the vessel. Four load cells read the full vessel mass in real time, so additions and transfers can be dosed and logged by mass, with no level-sensor guesswork on foaming or high-solids slurries.
- 4 × 250 kg = 1,000 kg total nominal capacity
- OIML R60 C3
- IP67
Seal-less magnetic agitation
Keeps solids in suspension and powders dispersing, without a single dynamic seal on the vessel: one less contamination path, and a mixer that is cleaned together with the tank.
- bottom-mounted
- magnetic coupling
- no shaft penetration
Peristaltic transfer
The product only touches the tubing: no valves, no seals, no contact with pump parts. Ideal for abrasive or shear-sensitive slurries, and the only wetted part is a replaceable tube.
- industrial peristaltic pump
- tubing sizes #88 / #92
Control cabinet
The unit is driven from its own cabinet: the operator sets and follows the process on the touchscreen, without a separate control station.
- AISI 304 cabinet
- touchscreen HMI
- emergency stop
- signal tower
Where it fits
Slurry & suspension preparation
High-solids media, powders and adsorbents kept homogeneous while they are dosed by weight.
Media & buffer preparation
Powder addition through the hopper into an agitated, fully drainable vessel.
Substrate feed vessel
Gravimetric dosing to the bioreactor in fed-batch processes.
The unit, photographed
-
Actual unit -
Configuration render -
-
-
-
Stock unit or build-to-order
| Stock unit | Build-to-order | |
|---|---|---|
| Lead time | 2 weeks | On request |
| Configuration | Fixed, as described | Fully custom |
| Availability | Up to 3 units | — |
Need a different volume or configuration? Media and buffer tanks →
What’s in the crate
Full documentation pack and optional installation, commissioning and training. Details on request.
This PDF covers the V-CIP-SGL / V-SCIP-SGL range, not this stock unit: volumes, options and design codes listed in it are configurable and are not all part of the unit described above.
Frequently asked questions
Within 2 weeks from order confirmation; up to 3 units are available.
Our engineering team will define the integration with you, starting from the control system you already run.
Contact us to arrange a visit or a video inspection at our Cernobbio plant.
See our build-to-order range of media and buffer tanks, and tell us what the process needs.
Available now, up to 3 units
Stock units are allocated on a first-confirmed basis. Contact our engineering team for the datasheet, documentation and a quotation.
Price on request