Single-use vessel DSUB A Expansion Series
Single-use vessel with top-entry probes, through the headplate: medical-grade PMMA, pre-assembled and pre-sterilized, in total volumes of 350 mL, 750 mL and 1.5 L.
DSUB A Expansion Series specifications
The top-entry single-use vessel and its connections.
Mixer
50 W (350 mL) or 100 W (750 mL and 1.5 L) motor, 1 to 600 rpm.
PG13.5 probe ports
3 ports on the headplate for the top-entry probes.
Service tubes
4 reagent tubes and 1 sampling / inoculum tube.
Headplate ports
M12 condenser port, antifoam port and PT100 temperature sensor port.
Impellers
2 impellers on the mixer shaft.
Single-use vessel
Total volumes of 350 mL, 750 mL and 1.5 L, gamma ray sterilized; operating temperature 10 to 60 °C.
Micro sparger port
1 port in the bottom for the microsparger.
Technical data
Specifications of the three DSUB A Expansion Series volumes.
| Parameter | 350 mL | 750 mL | 1.5 L |
|---|---|---|---|
| Working volume | 245 mL | 525 mL | 975 mL |
| Minimum working volume | 100 mL | 200 mL | 400 mL |
| Mixer | 50 W | 100 W | |
| Agitation speed | 1 – 600 rpm | ||
| Heating blanket | 50 W | 100 W | |
| Cooling | 50 W | 150 W | |
| Operating temperature | 10 – 60 °C | ||
| Pressure leak test | 1 bar | ||
| Impellers | 2 | ||
| Material | Food-grade plastic, FDA compliant | ||
| Sterilization | Gamma ray | ||
| H/D ratio | 1:1.65 | 1:1.9 | 1:2.35 |
| PG13.5 probe ports | 3 | ||
| Reagent tubes | 4 | ||
| Sampling / inoculum tube | 1 | ||
| M12 condenser port | 1 | ||
| Antifoam port | 1 | ||
| PT100 temperature sensor port | 1 | ||
| Micro sparger port | 1 | ||
Documentation (PDF)
Technical documents in PDF · free registration required.
Innovative solutions
for your bioprocesses
Tell us about your application: our team replies within 24 hours.
